How to Build A Car Dolly in 2023? {Ultimate Guide} 

Car tow dollies provide for the safest and most effective towing of vehicles. If you’re wondering how to build a car dolly, keep in mind that just the front two wheels of the vehicle are supported by the dolly, while the back two stay on the ground.

Tow dollies for cars are distinct from the trailers often used for building a car dolly. Building a tow dolly requires following a few simple steps and common sense. Without further ado, let’s delve into this post to find out how to build a tow dolly, as well as the process of building a car dolly. 

What is a car tow dolly?

The only purpose of building a car dolly is to move another automobile from one location to another. While the rest of the vehicle or wheels stay on the ground, building a car dolly is to support the vehicle’s unusual front wheels. 

How come it works so well?

Thinking of how to build a car dolly allows you carry a car or truck without a trailer. It’s replacing traditional towing techniques. In case of an accident or a breakdown, a tow truck is essential.

Read: How To Start A Land Clearing Business 

Equipment Necessary for Constructing a Tow Dolly

Building a car dolly requires certain materials. You may get these items at any hardware shop in your neighbourhood.

Tips for Constructing a Tow Dolly

  • The first thing you need to do if thinking how to build a tow dolly is to calculate the distance between the axle tube and the leaf spring mounts, and then saw the axle in half along that line. Slip the hassocks of the axle over the outer diameter of the three-foot-long sprinkler pipe to connect the two. After that, you may sever the angle steel in half and then weld one half into the side of the tow dolly.
  • Two pieces of angle steel, one for the top and one for the bottom of the tow dolly, will need to be fabricated. The axle’s width is the primary factor in this calculation. These two slides must be soldered together.

This process will help you to understand how to build a tow dolly. 

You’ll need help from another individual since building a car dolly isn’t something you can accomplish on your alone. A person who is well-versed in the use of a construction tow dolly might be consulted for more insight.

Thinking of how to build a tow dolly might help you save a significant amount of money right now. To ensure its longevity, you should also give it regular care and attention.

Read: How To Start A Septic Tank Business?

How to Use a Car, Dolly, to Tow a Vehicle

If you are thinking about how to build a car dolly, let’s take a look at some of the best practices Get the vehicles inspected first.

1. First, you should inspect your automobile before you start working on a dolly. 

To lighten the load, remove any unnecessary items from your bag or from your personal belongings. There’s no denying the benefits of being able to tote about a lightweight car across long distances.

2. Second, make sure you double-check the wheel straps.

A tow dolly can’t be constructed without wheel straps. For the obvious reason of maintaining a tight grasp on the vehicle so as to avoid dropping it or losing control of it while in transit. But after a while, the straps become more prone to wear and tear. 

3. Third, inspect a car transporter by taking it apart piece by piece.

In addition, before utilising the car tow dolly, make sure it is in working order. 


We hope this article cleared all your confusion concerning how to build a car dolly. In case of any queries, feel free to connect with us. 

Leave a Comment